Modification History
Release |
Comments |
1 |
This qualification replaces RII40813 Certificate IV in Civil Construction Design. Amended packaging rules. Added new unit RIILAT402D Provide supervision in the leadership of diverse work teams to Group D electives. Updated codes of imported units. |
2 |
This version was released with RII Resources and Infrastructure Training Package version 3.0. |
3 |
This version includes minor changes from RII40815 Certificate IV in Civil Construction Design Version 2. Removed four deleted units of competency from Group B and replaced with three newly imported units of competency. |
Qualification Description
This qualification reflects the role of people providing design support for professional Engineers. They perform tasks involving a broad range of varied activities most of which are complex and non-routine, for example, this might include civil works drafting. They are responsible for applying the design work instructions and practices to ensure the quantity and quality of the output of others and contribute to the development of technical solutions to non-routine problems.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Total number of units = 12
12 elective units, of which:
- at least two (2) must be chosen from Group A
- at least two (2) must be chosen from Group B
- at least two (2) must be chosen from Group C
- at least two (2) must be chosen from Group D
- no more than two (2) units may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Group A |
|
Unit code |
Unit title |
BSBINM401 |
Implement workplace information system |
BSBINN301 |
Promote innovation in a team environment |
BSBLDR402 |
Lead effective workplace relationships |
BSBMGT401 |
Show leadership in the workplace |
BSBMGT403 |
Implement continuous improvement |
BSBWOR404 |
Develop work priorities |
Group B |
|
Unit code |
Unit title |
MEM09011B |
Apply basic engineering design concepts
|
MEM30031A |
Operate computer-aided design (CAD) system to produce basic drawing elements |
MEM30033A |
Use computer-aided design (CAD) to create and display 3-D models
|
Group C |
|
Unit code |
Unit title |
RIICWD501D |
Prepare detailed design of foundations |
RIICWD502D |
Prepare detailed design of lighting |
RIICWD504D |
Prepare detailed design of environmental controls |
RIICWD505D |
Prepare detailed design of landscaping |
RIICWD506D |
Prepare detailed design of canals |
RIICWD507D |
Prepare detailed geotechnical design |
RIICWD508D |
Prepare detailed design of rural roads |
RIICWD511D |
Prepare detailed design of sub-divisions |
RIICWD513D |
Prepare detailed design of rail civil infrastructure |
RIICWD514D |
Prepare detailed design of dams |
RIICWD515D |
Prepare detailed design of airfield civil works |
RIICWD516D |
Prepare detailed design of bicycle ways |
RIICWD517D |
Prepare detailed design of industrial hardstands |
RIICWD518D |
Prepare detailed design of open car parks |
RIICWD519D |
Prepare detailed design of inter modal facilities civil works |
RIICWD521D |
Prepare detailed design of flexible pavements |
RIICWD522D |
Prepare stabilised material mix design |
RIICWD523D |
Prepare asphalt mix design |
RIICWD524D |
Prepare design of spray seal surfacing |
RIICWD525D |
Select pavement surfacing |
RIICWD527D |
Prepare detailed design of traffic signals |
RIICWD529D |
Prepare detailed design of underground services |
RIICWD530D |
Prepare detailed design of surface drainage |
RIICWD531D |
Prepare detailed design of subsurface drainage |
RIICWD537D |
Prepare detailed design of marine structures civil works |
Group D |
|
Unit code |
Unit title |
CPPSIS3015A |
Collect basic spatial data |
CPPSIS5032A |
Capture new spatial data |
CPPSIS5035A |
Obtain and validate spatial data |
CPPSIS5036A |
Integrate spatial datasets |
MSL924003 |
Process and interpret data |
MSL974016 |
Perform physical and mechanical tests |
MSL974019 |
Perform chemical tests and procedures |
MSL975031 |
Supervise sampling, inspections and testing at construction sites
|
MSL975044 |
Perform complex tests to measure engineering properties of materials
|
RIICBS401D |
Apply the principles for the asphalt paving and compaction |
RIICBS402D |
Apply the principles for the application of bituminous sprayed treatment |
RIICBS403D |
Apply the principles for the application of polymer modified binder |
RIICBS404D |
Apply the principles for the selection and use of bituminous emulsion |
RIICBS405D |
Apply the principles for the application of slurry surfacing |
RIICBS406D |
Apply the principles of pavement profiling using a profiler |
RIICBS407D |
Apply the principles for the manufacture and delivery of hot mix asphalt |
RIICBS408D |
Apply the principles for the manufacture of cold mix |
RIICBS409D |
Apply the principles for the manufacture of polymer modified binders |
RIICBS410D |
Apply the principles for the manufacture of bituminous emulsion |
RIICBS411D |
Apply the principles for the manufacture of slurry surfacing |
RIICPL401D |
Apply the principles for the installation of underground service using open excavation |
RIICRC401D |
Apply the principles of flexible pavement construction |
RIICRC402D |
Apply the principles of rigid pavement construction |
RIICRC403D |
Apply the principles of the stabilisation of materials |
RIICRC404D |
Inspect and report on pavement condition |
RIICRC405D |
Carry out pavement condition measurement |
RIICSG401D |
Apply the principles of civil concrete structures construction |
RIICSG402D |
Apply the principles of civil steel structures construction |
RIICSG403D |
Apply the principles of civil timber structures construction |
RIICSG404D |
Apply the principles of civil masonry, crib and gabion structure construction |
RIICTC401D |
Apply the principles of tunnel construction |
RIICTT401D |
Apply the principles for the installation of underground services using trenchless technology |
RIICTT402D |
Apply the principles for the repair and rehabilitation of underground services using trenchless technology |
RIILAT402D |
Provide supervision in the leadership of diverse work teams |
RIIMEX403D |
Apply the principles of canal construction |
RIIMPO402D |
Apply the principles of earthworks construction |
RIISTD202D |
Collect routine site samples |
Qualification Mapping Information
Code and titlecurrent version |
Code and titleprevious version |
Comments |
Equivalence status |
RII40815 Certificate IV in Civil Construction Design |
RII40813 Certificate IV in Civil Construction Design |
Packaging rules changed to clarify intent; added an elective unit |
Equivalent qualification |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272