MEM07027 Perform advanced press operations

Release: 1

MEM07027 Perform advanced press operations

Modification History

Release 1. Supersedes and is equivalent to MEM07027B Perform advanced press operations

Application

This unit of competency defines the skills and knowledge required to perform advanced press operations and relates to operations where the output of the machine/process can be varied at the discretion of the operator and where recognition/rectification skills are applied based upon product/material/process knowledge to achieve specified outcomes.

Where operational maintenance is required to be performed unit MEM07001 Perform operational maintenance of machines/equipment should also be selected.

When production packaging and labelling of the finished goods or product is required unit MEM11006 Perform production packaging should also be selected.

Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Band:	A

Unit Weight:	6

Pre-requisite Unit

MEM07024	Operate and monitor machine and process
MEM09002	Interpret technical drawing
MEM11011	Undertake manual handling
MEM12023	Perform engineering measurements
MEM13015	Work safely and effectively in manufacturing and engineering
MEM16006	Organise and communicate information
MEM18001	Use hand tools

Competency Field

Machine and process operations

Elements and Performance Criteria

Elements describe the essential outcomes.	Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Determine job requirements	1.1	Follow standard operating procedures (SOPs)
1.2	Comply with work health and safety (WHS) requirements at all times
1.3	Use appropriate personal protective equipment (PPE) in accordance with SOPs
1.4	Identify job requirements from specifications, drawings, job sheets or work instructions, including machine or process selection and settings
2	Conduct pre-start checks	2.1	Check safety equipment and guards for correct position and operation
2.2	Undertake programmed operational maintenance according procedures
2.3	Undertake pre-start checks to SOPs
2.4	Verify the match task requirements against equipment, raw material and tooling
3	Operate machine/ process	3.1	Start up and operate machine/process in accordance with job instructions and SOPs
3.2	Load components/feed stock and maintain consistent with production requirements
3.3	Unload machine/process output using appropriate manual handling techniques
3.4	Handle machine/process output and store in a manner not likely to cause damage
3.5	Record production data to SOPs
4	Monitor machine/process	4.1	Monitor machine/process for safe and correct operation
4.2	Follow emergency procedures in accordance with SOPs
5	Recognise and rectify deviations and faults in product/output, raw material/feed stock, tooling and machine/ process	5.1	Recognise faults/deviations from SOPs, job sheets or other documentation
5.2	Rectify faults/deviations in accordance with standard operating procedures, job sheets or other documentation
5.3	Adjust machine/process settings within parameters, as required

Foundation Skills

This section describes those required skills (reading, writing, oral communication and numeracy) that are essential to workplace performance in this unit of competency.

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range of Conditions

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, accessibility of the item, and local industry and regional contexts) are included.
Metal working press operations include one (1) or more of the following:	drawing blanking bending coining sizing extruding forming and shaping
Faults/deviations include one (1) or more of the following:	splits warping deformation dimensional errors gauge variation hardness colour variation marks missing detail distortion

Unit Mapping Information

Release 1. Supersedes and is equivalent to MEM07027B Perform advanced press operations

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2